CP Plotter Paper - 60gsm
Premium grade White paper, suitable for use on any
plotter.
Can also be used for hand drawn markers.
CP30 30" 76cm
CP36 36" 91cm
CP48 48" 122cm
CP60 60" 152cm
CP65 65" 165cm
CP72 72" 182cm
CP79 79" 202cm
300m per roll
Available in 500m rolls p.o.a
CP50 Bondex Paper - 50gsm
Good quality white paper, suitable for use on most
plotters.
Can alsobe used for hand drawn markers.
CP5036 36" 91cm*
CP5048 48" 122cm
CP5060 60" 152cm
CP5062 62" 155cm
CP5065 65" 165cm
CP5072 72" 182cm
CP5079 79" 202cm
300m per roll
*250m per roll on this width only
Available in 500m rolls to order
SC Spot & Cross - 60gsm
Used in the Design Room and as a master when making
multiple hand markers. Follow spot-cross-spot-cross for the
grain line
or spotscrosses for your 45º bias angle.
SC30 30" 76cm
SC36 36" 91cm
SC48 48" 122cm
SC60 60" 152cm
SC65 65" 165cm
SC72 72" 182cm
250m per roll
CHV Hot-Melt Heatseal Plotter
Paper - 68gsm
Premium grade paper with translucency for matching
checks & stripes.
CHV36 36" 91cm
CHV60 60" 152cm
CHV64 64" 162cm
CHV72 72" 182cm
250m per roll
|
CHB Hot-Melt Heatseal Plotter
Paper - 62gsm
Standard grade paper, a good all-rounder.
CHB60 60" 152cm
CHB64 64" 162cm
CHB72 72" 182cm
250m per roll
CHU Hot-Melt Heatseal Plotter
paper - 70gsm
Top quality grade paper. Best seller.
CHU736 36" 91cm
CHU740 40" 101cm
CHU748 48" 122cm
CHU760 60" 152cm
CHU761 61" 155cm
CHU764 64" 162cm
CHU772 72" 182cm
CHU780 80" 202cm
250m per roll
PE Heatseal Paper - 55gsm
Suitable for non-synthetic fabrics. Used extensively in
the upholstery trade & can also be used as embroidery backing.
CH36 36" 91cm
CH48 48" 122cm
CH60 60" 152cm
CH65 65" 165cm
CH72 72" 182cm
CH79 79" 201cm
250m per roll
Numberprint Hot-Melt Heatseal
Paper - 70gsm
Top quality grade paper.
SCHU736 36" 91cm
SCHU760 60" 152cm
SCHU764 64" 162cm
250m per roll
Numberprint Hot-Melt Heatseal
Paper - 62gsm
Standard grade for use when producing hand drawn
markers.
SCHB60 60" 152cm
SCHB64 64" 162cm
250m per roll
IMPORTANT NOTE
Hot-Melt Heatseal adheres to most fabrics whilst PE
Heatseal
adheres mainly to non-synthetic fabrics.
If the iron temperature is too high it can result in the
adhesive dropping off the paper causing marks and non-adherence.
If the iron temperature is too low the heatseal will not
activate.
PE Heatseal requires a hot iron between 120ºC and 200ºC.
Hot-Melt Heatseal requires a cool iron between 90ºC and 150ºC.
|
